Axis Communications AXIS 5570e Installationsanleitung Seite 25

AXIS 5570e Installation Guide
7. In the Select the printer's type window, choose your printer. If you cannot find the printer, select an
appropriate Generic one (PCL, PS, etc.)
Select TCP/IP (default) or IPX as network protocol.
8.
9. Click Next.
10. You will find the print server in the next window with the printer attached on the connected port.
Depending on the transport protocol you used when you start the installation, the print server should appear
as following:
TCP/IP Network protocol:
IP Address and Port, e.g.:
Only the ports with a connected printer show up in this window. If the printer is not in the
displayed print list, click Manually specify the print server and proceed with these steps:
11. Enter the print servers' IP address in the IP Address Field
12. Choose a port in the Print Server Port field, e.g. LPT1.
The available ports are LPT1, LPT2, USB1 and COM1
IPX Network protocol:
All the available ports will be presented, regardless if the printers are or not connected to
those ports, e.g.
The IPX Addresses for the above printers will appear as:
<IPX External Network Number>:<Print Server's HW address>:<Socket Number>
i.e.: 01d7e1c2:00408c5ff6a6:400c
where 400c, 401c, and 402c are the socket numbers corresponding the LPT1, LPT2, USB1
and COM1 physical ports:
13. If the printer is not in the displayed print list, click Manually specify the print server and then:
- Enter the <IPX External Network Number> in the Network field.
- Enter the <Print Server's HW address> in the LAN HW address field.
192.168.70.243
and
LPT1 AXIS5FF66A_P1
LPT2 AXIS5FF66A_P2
USB1 AXIS5FF66A_P2
COM1 AXIS5FF66A_P3
LPT1 400c
LPT2 401c
USB1 401c
COM1 402c
LPT1
Page 25