Herunterladen Inhalt Inhalt Diese Seite drucken

Axis Communications AXIS 5570e Installationsanleitung Seite 24

Netzwerk-printserver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 73
Page 24
Setup for NetWare
This sections contains basic setup instructions for NetWare. See the AXIS 5570e User's Manual on www.axis.com
for more detailed instructions.
Setup using NDPS, on page 24
- Public Access Printers, on page 24
- Controlled Access Printers, on page 26
Basic Queue-based printing over IP, on page 28
Setup using iPrint
For a setup using iPrint, see the AXIS 5570e User's Manual.
Setup using NDPS
The AXIS 5570e supports Novell Distributed Print Services (NDPS). You can run NDPS over Pure IP (TCP/IP) or
IPX/SPX.
Before the AXIS 5570e can be installed, make sure that NDPS is installed and a Broker is loaded on your NetWare
file server.
AXIS 5570e uses the AXIS NDPS Gateway for printing in networks using either IP or IPX as transport protocols.
The printer gateways are included with the NDPS software (from version 5.1 and up) and are automatically installed
together with NDPS.
Note:
NDPS requires that you run NetWare 4.11 or higher. Pure IP is only supported by NetWare 5 or higher.
Installing the AXIS 5570e in an NDPS environment
Having assigned an IP address to the AXIS 5570e as described on page 9, you are now ready to install the AXIS
5570e for NDPS printing. You can select to install the connected printers as public or controlled access printers.
Note:
If you do not have an NDPS Manager object available, start out with creating one in the NetWare Administrator.
Public Access Printers
Follow these instructions to create a public access printer using the NDPS Manager object in your NetWare
administrator utility:
1.
Double-click on the NDPS Manager object you will be using to control the Printer Agents.
2.
On the Identification page for the NDPS Manager, click the Printer Agent List button. The Printer Agent List
dialog will appear.
3.
Click New. The Create Printer Agent dialog will appear.
4.
Type a name of your choice in the Printer Agent Name field.
5.
Select the Axis Gateway configuration in the Gateway Type window.
6.
Click OK
AXIS 5570e Installation Guide

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis