Description Of Unit; 2. Technical Data; Declaration Of Conformity - Dreve Dentamid Drufomat scan D3300 Bedienungsanleitung

Drufomat scan

1. Description of unit

The Drufomat scan is a universally
usable pressure thermoforming unit
for daily use in the dental laboratory.
An integrated scanner allows a direct
taking over of product names, blank
thicknesses as well as individual heating
and cooling times by means of a bar-
code that can be found on each blank
package.

2. Technical data

Dimensions (H x W x D):
Weight:
Supply Voltage:
Max. power consumption:
Fuse of unit:
Operating pressure:
Min. operating pressure:
Max. pressure in pipe:
30 30
A variably adjustable forming pressure
of 29-87 psi (2-6 bar) in connection
with a vertically forming blank guar-
antees for very precise results.
In combination with optionally available
inserts the Drufomat scan can also be
used as flask press (P insert) and as
pressure pot (D insert).
460 x 290 x 290 mm
16 kg
100-240 V/50-60 Hz
115V-270 W, 230 V-315 W
T 3,15 A
29-87 psi (2-6 bar)
29 psi (2 bar)
145 psi (10 bar)

3. Declaration of Conformity

According to Machinary Directive (2006/42/EC)
Herewith we declare that the machine described below is in its conception and design and in the shape
delivered by us in accordance with the fundamental requirement for safety and health as prescribed in
the applicable EC-guidelines. In the case of any change or modification of the machine not authorised
by us this declaration becomes invalid.
Designation of machine: Drufomat scan
D3300 / D3300X1 / D3300X2
Type of machine:
Pressure thermoforming unit
Applicable EC-guidelines:
2006/42/EC Machinery Directive
2014/35/EU Low Voltage Directive
2014/30/EU EMC Directive
Applied harmonised standards:
2006/42/EC Machinary Directive
EN ISO 12100:2010 Safety of machinery - General principles for design – Risk assesment
+ Corrigendum to and risk reduction (ISO 12100:2010); German version EN ISO
DIN EN ISO 12100:2011-03 12100:2010 + Corrigendum to DIN EN ISO 12100:2011-03.
EN ISO 13732-1:2008 Ergonomics of the thermal enviroment - Methods for the assessment
of human responses to contact with surfaces – Part 1: Hot surfaces
(ISO 13732-1:2006); German version EN ISO 13732-1:2008-12.
EN 60204-1:2006/A1:2009 Safety of machinery – Electrical equipment of machines – Part 1:
+ Corrigendum to General requirements (IEC 60204-1:2005/A1 2008); German version
EN 60204-1:2006 EN 60204-1:2006/A1:2009 + Corrigendum to EN 60204-1:2006;
German version CENELEC-Cor.: 2010 to EN 60204-1:2006.
2014/35/EU Low Voltage Directive
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control
and laboratory use – Part 1: General requirements (IEC 61010-1:2010
+ Cor.: 2011); German version EN 61010-1:2010.
2014/30/EU EMC Directive
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
harmonic current emissions (equipment input current <= 16 A per
phase) (IEC 61000-3-2:2014); German version EN 61000-3-2:2014 .
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of
voItage changes, voItage fluctuations and flicker in public Iow-voltage
supply systems, for equipment with rated current <= 16 A per phase
and not subject to conditinoal connection (IEC 61000-3-3:2013; Ger-
man version EN 61000-3-3:2013.
EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use –
EMC requirements; Part 1: General requirements (IEC 61326-1:2012);
German version EN 61326-1:2013 Emission according to living area,
business and industrial undertakings as well as small enterprises inter-
ference stability according to industrial area.
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-0 · Fax: +49 2303 8807-55 · dentamid@dreve.de · www.dreve.com/dentamid
31 31