Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting of the adapter
Step 1
Grease thread and O-ring of the
sensor, and the sealing areas of
the adapter.
Make sure that the O-ring (B) is
correctly positioned.
Step 2
Screw the sensor into the
adapter.
Step 3
Clamp sensor and adapter
into a clamping device (E). The
sealing chamfers (F) must not be
damaged. Tighten the sensor
with a spanner until you can feel
the end stop.
B
36
E
F
21
Werbung
Inhaltsverzeichnis
