Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance; Specifications - Magnat SIGNATURE 1109 Bedienungsanleitung, Garantie

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

MAINTENANCE

The lacquered surface is best cleaned with a mild household cleaner. On no account use furniture polish or similar products on these
surfaces.
HOW TO AVOID DAMAGE TO YOUR VALUABLE SPEAKERS
All MAGNAT loudspeakers are designed and built for optimum sound reproduction with the tone controls in the central position – i.e. with
"linear" amplifier output. Turning up the bass and treble controls too far delivers more power to the woofers and/or tweeters, and at high
volumes this can actually destroy the speaker units!
If the output of your amplifier is significantly higher than the rated power handling capacity of your speakers extremely high volumes can
physically destroy your speakers. This doesn't actually happen often but you should be aware that it is possible.
Weak amplifiers with low output ratings can actually be more dangerous for your speakers at medium volumes because weak amplifiers
may overload much faster than powerful ones and this causes measurable and audible distortion, which is extremely dangerous to your
loudspeakers.
Always turn the volume down immediately as soon as you hear distortion! If you like listening to loud music make sure that your amplifier can
deliver at least as much power as the speakers' power-handling rating.
THE SOUND YOU CAN'T HEAR...
Amplifiers, tuners and CD players can all produce inaudible high-frequency signals – and this doesn't only apply to cheap products. If your
tweeters fail at low or medium volumes you should have a qualified technician check your system components for dangerous inaudible
signals.

SPECIFICATIONS

Configuration:
Power-handling capacity:
Impedance:
Frequency response:
Recommended amplifier output:
Efficiency (1W/1m):
Dimensions (WxHxD):
Accessory:
Subject to technical change.
Signature 1109
4 way bass reflex
300 / 550 watts
4 – 8 ohms
20 – 55 000 Hz
> 30 watts
94 dB
375 x 1280 x 410 mm
Metal spikes
Rubber spikes
7
Signature 1105
3.5 way bass reflex
200 / 350 watts
4 – 8 ohms
22 – 55 000 Hz
> 30 watts
93 dB
315 x 1080 x 350 mm
Metal spikes
Rubber spikes

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Signature 1105

Inhaltsverzeichnis