Using The Receiver; Led Indicator; English - BeeWi BBR100 Bedienungsanleitung

6
music player or mobile phone, to search for BBR100 receiver and
request pairing. Specific pairing steps may vary with different
Bluetooth devices; refer to the Bluetooth device's user manual for further
information.
When "BeeWi BBR100" is detected, enter pass code "0000",
and confirm; the receiver will be paired to the mobile device and
automatically connected.
If you need to connect manually after pairing has been done, select
"BeeWi BBR100" in the Bluetooth player list of paired devices. Note
the connection will always be made from the player.
When the connection is made, the BBR100 indicator light will flash
slowly every second.
Remark: If you want to pair it with another device, disconnect the
connected device first and pair the BBR100 receiver with the new
device according to above steps. When a device is disconnected, wait
about 10 seconds before the receiver gets back in pairing mode.

3. USING THE RECEIVER

3.1 Led indicator

LED indicator
Blue LED blinking quickly
Blue LED flashing slowly
3.2 Connecting multiple devices
When multiple devices have been paired to the BBR100 Receiver
it is easy to switch from one to the other. Just disconnect manually
the BBR100 in the current player device list and connect it manually
from the other player. Wait about 10 seconds for the receiver to be
accessible.
3.3 Turning off the BBR100 receiver
If you don't need to use BBR100, just take it out from the wall plug.
BBR100 Status
Pairing mode / not connected with a
Bluetooth device
Already connected with a Bluetooth
device

ENGLISH