Getting Started; Connecting The Receiver - BeeWi BBR100 Bedienungsanleitung

The USB port on the BBR100 can be used to charge any electronic
device using USB such as mobile phones, media players, or accessories.
1.3. Specifications
Bluetooth Standard
Operation Distance
Bluetooth Profiles
LED Indicators
Dimension
Weight
Power Input
USB Output
Audio Output

2. GETTING STARTED

2.1 Connecting the receiver

Connect the RCA or jack cable on the auxiliary input of the stereo
sound system. Then connect the other end of the cable to the audio
output of the BBR100.
Switch on your sound system and set the audio source on auxiliary
input (refer to the sound system user manual). Finally, plug the receiver
into the wall plug; the receiver will start to flash to indicate it is ready
to connect or pair.
2.2 Pairing the BBR100 receiver
Once the receiver is powered on, it will automatically enter the pairing
mode (LED blinking quickly). Turn on the Bluetooth device transmitter,
Bluetooth version 2.1+EDR
Class II, 10 meters typical
A2DP only
Blue
66 mm L x 46 mm D
45 gr
Euro Plug, 110-240V
1 x USB, 5V / 500mA
Stereo audio jack 3.5 mm
ENGLISH
5