OPERATION
1. Insert the product into a suitable earthed power point (fig. 1).
2. To connect a USB device use a suitable standardised USB cable.
3. Connect the USB A jack of the cable with the USB ports on the
product.
4. Connect the other end of the USB cable with your USB device (fig. 2).
5. If necessary insert the power plug of a power-operated device into
the socket on the product (fig. 3). When doing so pay attention to
the maximum permitted connected load.
Fig. 1
GEA-004_A6_green_150316.indb 15
If mains-powered loads are connected to the earthed
power point, please observe the maximum permitted
connected load and do not exceed it. Observe the
mains voltage. The product is only allowed to be
operated with suitable mains voltage.
Where necessary switch off your devices before
connecting them to the product.
Fig. 2
Fig. 3
15
16/3/15 11:10 AM