Dry Vacuuming; Blowing; Cleaning/Maintenance; Cleaning & Maintenance - CARAMBA CP-WDE 2314-S Inox Originalbetriebsanleitung

2. Suctioning up (draining) water: place
the suction hose (
dle ( 14) into the water tank and
suction up the water.
3. Empty the waste container immedi-
ately after vacuuming because it is not
designed to store liquids (see "Clean-
ing/Maintenance").
Never reach into the water to be
suctioned up. Danger of electric
shock.
If the waste container is full, a
float closes the suction opening,
and the vacuum operation is inter-
rupted. Switch off the machine and
empty the waste tank.
If foam or liquid exits, switch off the
machine immediately.

Dry vacuuming

The appliance is supplied with the
folded filter bag (16) fitted.
1. To vacuum dry, fit the fluted filter
(16) onto the filter basket on the mo-
tor housing (21). Here, the upward
curved sealing lip must point away
from the motor housing.
2. Fit the filter cover (16a) and turn it
gently to lock it.
Vacuuming with the paper filter
bag:
To avoid the fluted filter becoming
clogged, we recommend the ad-
ditional use of a paper filter bag.
Insert the paper filter bag
2. Fold down the side flaps (22) on the
paper filter bag (17) at the perforation.
13) on the han-
3. Fit the paper filter bag (17) with the
short flap (22) upwards over the
intake connections (23) (see arrow
). The sealing ring (24) at the fil-
ter bag opening must completely sur-
round the lip (25) on the suction pipe.
A fine dust filter bag made of micro
filter fleece is also optionally avail-
able, which can be used in place of
the included paper filter bag (see
"Replacement parts/Accessories").
Vacuuming fine dust:
Specific suction processes (e.g. grinding
of paints and lacquers, milling or drilling
walls, grinding or drilling hard wood) can
pose a risk from hazardous dust.
We recommend using the following op-
tional filter combination, which is availa-
ble, for fine dust (see "Replacement parts/
Accessories"):
1. Folded filter (16)
2. Fine dust filter bag made of fleece,
which is used in stead of the paper
filter bag (17) included in the scope of
delivery.

Blowing

Operation without the use of a filter
is recommended.
To blow, plug the suction hose (13) onto
the connection (5) on the motor head.

Cleaning/Maintenance

Pull out the mains plug.
This will prevent danger of injury
from electric shock.
GB
21