ThermoPro TP-12 Bedienungsanleitung Seite 2

and hold button until the digits flash, then press once to increase to your desired
BARBECUE/oven/smoker temperature. To increase temperature faster, press
and hold for 2 seconds to increase by 10 ºF per second. In TIMER MODE, when
the TIMER stops, press once to increase the Hour. Press and hold for 2 seconds
to increase by 10 hours per second.
2. LO/MIN – In THERMOMETER MODE, press once to display the minimum set
BARBECUE/oven/smoker temperature setting. To increase temperature, press
and hold until the digits flash, then press once to increase to your desired
BARBECUE/oven/smoker temperature. To increase temperature faster, press
and hold for 2 seconds to increase by 10 ºF per second. In TIMER MODE, when
the TIMER stops, press once to increase the MINUTE. Press and hold for 2
seconds to increase by 10 minutes per second.
3. MODE/LIGHT – Press once to turn on the LCD back light which will last for 5
seconds. Press and hold for 2 seconds to select THERMOMETER MODE or
TIMER MODE. When wanting to save your selected temperature, press once
to save temp setting.
4. HI/CLEAR – In THERMOMETER MODE, press once to display the current FOOD
temperature setting. To increase temperature, press and hold until the digits flash,
then press once to increase to your desired FOOD temperature. To increase
temperature faster, press and hold for 2 seconds to increase by 10 ºF per second.
In TIMER MODE, when the timer stops, press once clear the timer setting back
to 0:00.
5. START/STOP –In TIMER MODE, press it to start or stop the timer countdown
or count up.
6. /SYNC – Press it to turn ON/OFF the receiver. Press and hold for 2 seconds
to synchronize/pair with transmitter.
7. / ºF /ºC- press once to activate/deactivate the temperature alarm. Press and
hold it for 2 seconds to select receiver temperature display in ºC or ºF.
Transmitter Features
TX LED
LCD
ºF/ºC/
WIRE STAND
Battery Compartment
-2-
LCD (Liquid Crystal Display) – displays temperature of both FOOD and BARBECUE.
It will automatically switch between FOOD and BARBECUE displays.
WIRE STAND – Allows you to stand the
and used as a hanger.
BATTERY COMPARTMENT – holds 2 AAA batteries.
1 FOOD – Plug-in for stainless steel FOOD probe.
2 BARBECUE –Plug-in for stainless steel BARBECUE probe.
Button
once
ºF /ºC / –Press to turns ON/OFF the transmitter; Press and hold for 2 seconds to select
transmitter display in
the temperature
Installing batteries
Open the battery compartment of the receiver and insert two "AAA" batteries with correct
polarity. Open the battery compartment of the transmitter and insert two "AAA" batteries
with correct polarity.
Turn On/Off Unit
Press /SYNC button on the receiver to turn on/off the receiver;
Press F/ C/ button on the transmitter to turn on/off the transmitter.
º º
Synchronize/Pair Transmitter and Receiver
The transmitter and receiver need to be synchronized or paired before using. There
are two ways to do so:
Option 1:
a. Insert the stainless steel probes into the corresponding plugs in the transmitter.
Note: The FOOD probe is 6 inches long with pointed end while the BARBECUE
probe is 3 inches long with a grill rack clip.
b. Open the battery compartment of transmitter and insert two "AAA" batteries.
The transmitter will show the current temperature on its LCD display and
a u t o m a t i c a l l y k e e p s e n d i n g t h e t e m p e r a t u r e r e a d i n g t o t h e r e c e i v e r f o r
s y n c h r o n i z a t i o n / p a i r i n g .
c. Then open the battery compartment of receiver and insert two "AAA" batteries.
The receiver will enter Synchronization mode which will last for 120 seconds.
The display shows "---" and it is flashing.
d. Wait for a moment until the temperature reading shows on the receiver display,
it means the synchronization/Pairing is complete. Your professional remote
cooking thermometer is ready for use.
Note: The transmitter and receiver are only required to be synchronized/paired
transmitter
on tabletop or it can be reversed
ºC and ºF.
-3-