Preparing For Inhalation - inqua BR030100 Gebrauchsanweisung

Preparing for inhalation

Assembling the nebuliser
If the nebuliser has been dismantled, follow the instructions below to
assemble it for use:
Lug
Slots for
the lugs
Twist the nebuliser upper section clockwise while pressing gently to
engage the lugs on the nebuliser upper section in the slots in the lower
section. The two nebuliser sections will be attached securely by gently
twisting clockwise.
40
Note that the nebuliser upper
section (1a) and the nebuliser
lower section (1b) are attached
to each other by a "bayonet"
1a
closure.

The nebuliser upper section
is inserted carefully into the
nebuliser lower section.

Pay particular attention to
front
the indication front in the
drawing.
The lugs in the nebuliser
upper section are different
sizes and only fit in the dif-
ferent sized slots in the
1b
nebuliser lower section in a
certain direction.