Storage Function - LG STYLER S3WERB Bedienungsanleitung

36 OPERATION

STORAGE FUNCTION

The storage function is set.
• Once completed, a selected course will lead to the storage function.
NOTE
• During the drying course, no storage function is set.
• After the storage function is entered and the power button pressed, the setting is
released.
• The storage function operates for a maximum of 24 hours.
• You can open the door anytime even during the course of the storage function.
• This operation warms clothes with air in order to store them softly and moistlessly and
can therefore produce noises periodically. It is not a defect, but a normal operation. So
rest assured.
※ This image is for illustration purposes only. The location of the reservation button can vary
depending on models.So check your model purchased
1
Place clothes into the Styler.
2
Press a course button to select your desired course and then press the reservation button
to set a storage option.
(e.g. If the reservation button is pressed for three seconds after a course is selected, the
storage LED light will be lit.)
3
Press the OPERATION / PAUSE button to start.
4
If you want to cancel the storage function, press another course button.
Hold to Start
PRESS AND HOLD DELAY START
FOR THREE SECONDS TO SELECT
THE NIGHT CARE FUNCTION.