Emptying The Water Tank; Cleaning And Care; A) General; B) Filter - BASETech 1516850 Bedienungsanleitung

12. Emptying the water tank

Empty the water tank as soon as the W.F indicator lights up or if you plan to not use the product for an
extended period.
• Disconnect the mains plug from the mains.
• Remove the black rubber cover from the drain opening (7).
• Remove the semitransparent rubber plug from the drain opening. The water will pour out immediately.
• Install a suitable drain hose (not included) where required.
• Divert the water outside or into a suitable drain.

13. Cleaning and care

a) General

Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical solutions
since these can penetrate the housing or impair functionality.
• Disconnect the product from the power supply before cleaning.
• Clean the product with a dry, fibre-free cloth.

b) Filter

• Clean the filters once every 2 weeks.
• Remove both filters (1+6).
• Rinse the filters under lukewarm water.
• Let the filters dry thoroughly before replacing them.

14. Warning messages

Display Cause
E0 Temperature sensor defective
E2
Water tank full
Solution
Repair by expert required.
Empty the water tank.
23