Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Connection
7. Operation
Establish a connection between the battery and the charger first. Then plug the mains
connector. This sequence must always be followed in this order. When removing the
connection, remove the mains plug from the mains first before disconnecting the
battery circuit.
NOTE: The total charging time depends on the capacity of the battery installed and the
depth of discharge. When purchasing a charger please indicate the battery capacity
and type. If the battery has been partly discharged, the charging process will finish
sooner.
Display (KOP3000 master only)
1: Battery (+)
2: Battery (-)
Expansion / termination port
CAN terminator
!
KOP3000 Master-Slave connection
Werbung
