Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
Setting up your Dry Cutter: Place the Tile Cutter on a level surface. Mount the scoring wheel
and secure with the knurled knob (1). Swivel the 2 Tile Supports out (2). Next, swivel the 2 Tile Stops
out
(3)
and secure them in 90° position with the locking device (4). Do not use damaged or worn out
scoring wheels, this will decrease the quality of the cut or result in breakage of the tile.
Cutting Procedures: Place the tile onto the tile cutter at the desired position and angle (5).
Position the scoring wheel at the beginning of the tile and move the scoring wheel over the tile
in one smooth movement (6). When cutting very rough tiles it may be necessary to repeat the scoring
movement until a continuous groove is made.
1
3
5
DIAMOND3 SPIDER OPERATING MANUAL V01/2008R2 9
GB
2
4
6
Werbung
