Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
Cutting Procedures Cont'd: Move the cutter into the breaking position by pulling the slide tube
on the lever (7). Put the breaker at the end of the tile near the end stop. Move the lever down and
apply sufficient force to break the tile (8).
Repetitive Cuts: The Diamond3® Dry cutters are supplied with an adjustable tile stop that allows for
repetitive cuts up to 45˚ (9)(10). Simply secure the Cutting Guide at the desired dimension and angle
to cut identical tiles.
Cutting larger tiles: In order to avoid breakage of lager tiles, the Diamond3® dry cutters are sup-
plied with two tile supports. Rotate and swivel the product supports out for optimal tile support
Maintenance: Diamond3® Dry Cutters are designed for minimum maintenance and durability. For
the longevity of your Diamond3® Dry Cutter and continued smooth cutting movement simply keep the
guiding bars dry and clean from cutting debris. Store the Dry Cutter clean and dry in the original carrying
case.
We declare under our sole responsibility that this product is in conformity with the following standards or
standardization documents. 98/37/EEC
Spare Parts see page 12
10 DIAMOND3 SPIDER OPERATING MANUAL V01/2008R2
OPERATING INSTRUCTIONS
7
9
8
10
Werbung
