closomat Palma Plus Bedienungsanleitung Seite 51

Water system:
cold water connection only
performance:
– Volume flow: min. 7 litres per minute
– pressure: no special requirements owing to
built-in pump
cistern capacity:
Min. 6 to max 9 litres.
the palma and lima models are designed as
6-litre systems and set for this at the factory.
(Your fitter can set the filling volume for any
other possible conditions.)
Boiler:
– Volume: 1.7 litres approx.
– stand-by temperature: 36–38°c approx.
(can be set by service technician)
– pressure:
– reset position: unpressurized
– Working pressure: approx. 0.2 Mpa
(2 bar)
– Heating time after use: 3 mins. approx.
the boiler keeps a constant stand-by
temperature, so that douche water at body
temperature is available at all times. alterna-
tively: Boiler economy control (to be activated
by service technician)
douche jet force:
– Variable externally, by pulling adjusting lever
– Basic pressure can be set by service
technician
the units are constructed in accordance with
the guidelines currently effective in ec
member states for drinking water supplies and
waste water systems.
- E -
51