Yamaha EPH-200 Bedienungsanleitung Seite 5

w Detachable cable
The attachment can be set to one of four different angles. When detaching and attaching
the cables, plug and unplug them straightly. Adjust the notch of the cable to the mark on
the earphone.
NOTICE
• When removing the cable from the earphones, always hold the junction not the cable.
Pulling by the cable can damage it.
• To avoid damage to the junction with a detachable cable, do not insert or remove it fre-
quently.
• The junction with a detachable cable is not a screw type. Turning it by force may damage it.
Adjust the notch
of the cable to the
mark on the ear-
phone.
Note
Though the junctions adopt MMCX connectors, the earphones may not be able to be connected
to commercially available MMCX cables.
e Smart cable holder
When not using the earphones, slide the smart cable holder (for preventing tangling) fully
upward. Also, insert the L-shaped plug in the smart cable holder to prevent the entire
cable from becoming tangled.
r L-shaped plug
Connect to an output jack of a portable player or a smart phone.
NOTICE
When removing the plug from the connected device, be sure to pull it out by firmly hold-
ing the plug itself, not the cable. Bending or pulling the cable forcefully may damage it.
EN 4