Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Applications.
The CompactSieve can be used for
primary mechanical waste removal.
A few examples:
1.
As a particle remover directly next
to the pond or to a waterfall /
stream return to pond.
2.
As a mechanical particle waste pre-filter before surface mounted biological stages.
3.
This unit can be mounted and used as a mechanical pre-filter for existing trickle filter systems.
For this application you have to make a hole in the bottom of the upper sieve, so the water can
go to the lower CompactSieve (without a sieve). In the lid of the CompactSieve you can see a
square marking to indicate the size of the hole you have to cut. You can fill the lower unit with a
biological filter media e.g. Lithaqua. Keep in mind to connect the overflow protection (A) of the
upper CompactSieve (this can be combined with the overflow output of the lower
CompactSieve [C] ). The normal output (B) of the upper one must be closed because the water
will go through the hole in the bottom.
4.
This unit can be connected to an
existing pumped pond skimmer
system. The unit must be mounted
above pond water level.
5.
The unit can be connected to a pond vacuum cleaner and the
returned water from the vacuum cleaner can be fed into the input
hose tail via a T-piece or directly. For extra particle removal and
saving your precious matured pond water.
pump
pump
skimmer
pump
pump
A
B
C
Lithaqua
pump
Werbung
