Herunterladen Inhalt Inhalt Diese Seite drucken

Schaub Lorenz F 8 Bedienungsanleitung Seite 30

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Manual mode
In manual mode the time of the day and the symbol
user has to control the cooking time.
To ensure that the oven does not stay switched on accidentally when operating in
manual mode, the timer, if no button has been pressed for 5 hours, will flash once
per second to indicate that the appliance will change to stand-by mode. The timer
will change to stand-by mode after 10 hours.
When the timer flashes in stand-by mode, press any button to reset the timer if you
want to continue operating the appliance. Press
more than 3 seconds to change to stand-by mode if you do not want to continue
operating the appliance.
Programming / Duration of cooking times
You can set a certain duration of a cooking time. Put the food into the oven. Set
the oven function and temperature. Max. setting time is 10 hours.
1. Press
until you see Dur on the display.
MODE
2. Use the + and - buttons to set the duration of the cooking time (see § setting of
the time of the day). Press
symbols A and
start operating.
3. When the set cooking time has elapsed, the timer switches off the appliance and
an acoustical signal sounds. The symbol A starts flashing. Set the oven function
and temperature to 0. You can cancel the acoustical signal by pressing any
button for less than 3 seconds. Press M
appliance changes to manual mode.
Programming / End of cooking times
This function stops cooking at a certain point of time. Put the food into the oven.
Set the oven function and temperature.
1. Press
until you see End on the display.
MODE
2. Use the + and - buttons to set the end of a cooking time (see § setting of the
time of the day).
3. Press
to confirm. The time of the day and the symbols A and
MODE
indicated on the display. While doing this the oven will start operating.
4. The timer switches off the appliance when reaching the set point of time. An
acoustical signal sounds. The symbol A starts flashing. Set the oven function
and temperature to 0. You can cancel the acoustical signal by pressing any
button for less than 3 seconds. Press M
appliance changes to manual mode.
to confirm. The time of the day and the
MODE
are indicated on the display. While doing this the oven will
are on the display only. The
and + simultaneously for
MODE
for more than 3 seconds and the
ODE
for more than 3 seconds and the
ODE
30
are

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis