Environmental Protection; Operating And Functional Elements; Before Startup - Kärcher BDP 43/1500 C Bp Originalbetriebsanleitung

Environmental protection

The packaging materials are
recyclable. Please do not throw
packaging in the domestic
waste but pass it on for recy-
cling.
Old units contain valuable recy-
clable materials. Batteries, oil
and similar substances may
not be released into the envi-
ronment. Therefore please dis-
pose of old units through
suitable collection systems.
Operating and Functional Ele-
ments
see cover page
1 Key switch
2 Battery status display
3 Dosing lever of pre-spraying unit (option)
4 Left switch
5 Left unlocking
6 Right unlocking
7 Handle
8 Right switch
9 Lever for level adjustment
10 Battery charging display
11 Storage, mains cable, charger
12 Catch bin for vacuum

Before Startup

Charging battery
Warning
Loss of battery capacity of account of fre-
quent recharging of partially discharged bat-
teries.
Recharge the battery only after it is fully dis-
charged. This is the case when 2 lamps in
the battery charger display are lit up.
Never switch on the appliance when the bat-
tery is being charged.
Î Remove the mains cable from the stor-
age bin.
Î Insert the mains plug into the socket.
The charging process takes approx. 8 hours.
Battery charging display
Display Significance
Both LEDs Mains, charging
illuminate process phase 1
in red
LED illumi- Charging proc-
nates yel- ess Phase 2
low
LED illumi- Charging proc-
nates ess completed,
green battery full
Only one Disruption, call
LED illumi- Customer Serv-
nates red ice
After charging
Î Disconnect the main plug from the sock-
et.
Î Store the mains cable in the storage bin.
Symbol
11
English