WilTec 50592 Bedienungsanleitung Seite 13

BEWARE:
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or you follow the instructions made by this person how to use
the device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION:
Run a visual inspection of the device before every use. Do not use the device if the safety

appliances are damaged or worn out. Never override safety regulations.
 Use the device exclusively according to the intended purpose stated in the instructions for
use.
 You are responsible for the safety of the working environment.
If the cable or the plug is damaged due to external influences the cable must not be repaired!

It has to be replaced with a new one. This work can be carried out only by an electrician.
 The voltage indicated on the type plate of the device of 230 Volt alternating voltage has to
correspond to the existent mains voltage.
Never lift, carry or fixate the device by using the power cable.

 Make sure that the electrical plug connection is placed in a flood-proof area and is protected
from moisture.
Disconnect the mains plug before the maintenance work.

 Avoid exposing the diesel pump to direct water jets or rain.
The user is responsible for the compliance with location specific safety and installing

regulations. (Ask an electrician).
 Consequential damage arising from flooded rooms caused by dysfunctions of the appliance
must be avoided by means of the appropriate measures. (installing an alarm system, reserve
pump).
In case of malfunction the repair work can be carried out only by a qualified electrician or the

WilTec-service.
 The appliance must not run dry or with a completely closed intake port. The manufacturer's
guarantee is no longer valid if the damage is caused by dry running.
WARNING:
Read carefully all the safety guidelines and the instructions.
Non-compliance with the safety rules and regulations can lead to an electric shock, fire and/or serious
injury. Keep the instructions and the safety guidelines in a safe place in case you need them in the
future.
Stability
The max. temperature of the conveyed liquid should not exceed +35°C in permanent operation.
The pump must not convey aggressive fluids (acids, alkali etc.) or fluids with abrasive substance
(sand). It must NOT pump water or easy flammable liquids (petrol).
.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
Seite 13