Installation - Respekta MW 800 E Bedienungsanleitung

WARNING! The appliance must be grounded. Use a suitable power cord only.
It must be plugged into a wall socket which is installed and grounded properly. In
event of an electrical short circuit grounding reduces the risk of electric shock by
providing an escape wire for the electric current. It is recommended that the
appliance is connected to a dedicated circuit, which supplies your appliance only. To
use high voltage is dangerous and may result in a fire or other accidents, which will
damage your appliance.
1. If you have got any question about the grounding or the electrical-connection
instructions, consult a qualified professional or an authorized aftersales service.
2. Neither the manufacturer nor the dealer can accept any liability for damage of
the appliance or personal injury resulting from disregarding the
electrical connection procedures.
While operating the appliance, it can cause interferences of your radio, TV set or
similar equipment. When this problem occurs, it may be reduced or eliminated by
taking the following measures:
1. Clean the door and the sealing surfaces of the appliance.
2. Relocate the microwave with respect to the receiver.
3. Move the microwave away from the receiver.
4. Connect the microwave to a different socket so the microwave and the receiver
run on different branch circuits.
1. The appliance is designed for being built-in (kitchen unit or comparable built-in
structure).
2. The built-in structure must be equipped with a proper ventilation. Contact your
furniture retailer if need be.
3. The upper exhaust duct must be installed properly.
4. How to built-in the appliance (look at the following figure).
Grounding
Radio interference

Installation

32
proper