Inhaltsverzeichnis
Werbung
7. Behördliche Vorschriften
Information for U.K. only
WARNING - THIS APPLIANCE MUST BE
EARTHED.
Important:
moulded 13A plug. To change a fuse in this type
of plug proceed as follows:
2. Fit new fuse which should be a BS 1362
outlets, it should be cut off and an appropriate
If the mains plug contains a fuse, this should
used, the fuse at the distribution board should
not be greater than 5A.
NOTE:
should it be inserted into a 13A socket
elsewhere.
(B)
(A)
How to connect a plug
The wires in the mains lead are coloured in
accordance with the following code:
BLUE -"NEUTRAL"("N")
BROWN -"LIVE"("L")
GREEN&YELLOW -"EARTH"("E")
1. The GREEN&YELLOW wire must be
connected to the terminal in the plug
which is marked with the letter "E" or by
the Earth symbol or coloured GREEN or
GREEN&YELLOW.
2. The BLUE wire must be connected to the
terminal which is marked with the letter
"N" or coloured BLACK.
3. The BROWN wire must be connected
to the terminal which is marked with the
letter "L" or coloured RED.
20
Werbung
Inhaltsverzeichnis
