Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
GB
Fig. 4: Fitting the enclosure top
Fig. 5: Fitting the Rast 5 plug
22
R E
S E
T
4
3. Position the enclosure top at an angle on the lower part of the enclosure and
press at the bottom until it clicks into place (4)
4. Route the cable inside the boiler to the control unit
Note: For boilers in series WGB, WBS and WBC, route the cable through a PG fit-
ting into the boiler.
5
5. Fit the Rast 5 plug at the end of the connecting cable as shown in Fig. 5 (5)
6. Secure the connecting cable in the strain relief fittings of the control panel and
connect in accordance with the wiring diagram Fig. 1
Wireless receiver FE
3
2
1
gr:
green
br:
brown
wh: white
136 230 06.11
Werbung
Inhaltsverzeichnis
