Beko DE 8431 PA0 Bedienungsanleitung Seite 52

Operating the product
5.6 Auxiliary functions
Audio alarm
An audio alarm is heard when the program is
completed in the tumble drier. If you do not
want to hear the audio alarm, please press
the "Audio Alarm" button. When you press
the audio alarm button, the light turns on
and you hear no alarm at the completion of
program.
C
You may select this function
before or after the program
starts.
5.7 Warning indicators
C
Warning indicators may vary
depending on the model of your
tumble drier.
Filter cleaning
The warning indicator turns on to show that
the filter needs to be cleaned.
Water tank
The warning indicator turns on to show that
the water tank needs to be drained.
If the water tank fills during the operation of
program, warning indicator flashes and ma-
chine pauses. In such a case, drain the water
in water tank and start the program by press-
ing Start/Pause button. Warning indicator
turns off and program is resumed.
Delay time
If you prefer to dry your laundry after a cer-
tain period of time, you may delay the start
of program up to 3, 6 or 9 hours thanks to
the delay function.
• Open the loading door, and put the laun-
dry in.
• Select the drying program.
• By pressing the Delay time selection
button, set the desired delay time.
When the Delay time button is pressed
one more time, 3-hour delay is selected
and relevant indicator light turns on.
When the same button is pressed again,
6-hour delay is selected, and one more
pressing causes 9-hour delay. If the
delay time button is pressed once more,
the delay is cancelled.
52 / EN
• After the selection of Delay time,
delayed operation is started for the
selected program by pressing "Start/
Pause" button.
C
Laundry may be added or
removed during the delay time.
At the end of countdown for
Delay Time, Delay Time warning
indicator turns off and drying
starts.
Changing the delay time
If you want to change the time during count-
down:
• Cancel the program by turning On/
off/program selection button. Repeat
the Delay time selection process after
selecting the desired program.
Cancelling the delay time function
If you want to cancel the delay time count-
down and start the program immediately:
• Cancel the program by turning On/off/
program selection button. Press the
"Start/Pause" button after selecting the
desired program.
5.8 Starting the program
Start the program by pressing the Start/
Pause button.
Indicators of Start/Pause/Ready and Drying
turn on to show that program has started.
5.9 Child Lock
There is a child lock in the tumble drier that
prevents the program flow from being af-
fected when the buttons are pressed during
operation of program. When the Child Lock is
active, all buttons on the panel are disabled
except for the On/off/program selection but-
ton.
In order to activate the child lock, press and
hold the Delay time and Audio alarm buttons
spontaneously for 3 seconds.
Once the program is completed, the child lock
must be disabled to start a new program or
intervene in the program. Press and hold the
same buttons for 3 seconds to disable the
child lock.
C
When the Child Lock is enabled,
child lock warning indicator on
the display turns on.
Dryer / User Manual