Ace instruments ALP-1 Bedienungsanleitung Seite 6

ACE ALP-1 Printer
Operating manual
For usage with ACE ALP-1 med Breathalyzer
Author liability:
All information herein was created conscientiously and under assumption of
correctness. The creator cannot be held liable though for the use of any kind
whatsoever and any ensuing consequences. The creator is not liable for any
costs or expenses for damage that are the result of any information within
this document. Any information is subject to change without prior notice.
Short description:
This mobile printer is offered for the usage with the ACE ALP-1 med Breathalyzer.
Measurements won by the ACE ALP-1 med can be printed on paper via cable or
via IrDA connection. A Bluetooth connection is optional and not available with this
printer model.
Scope of delivery:
1 ACE ALP-1 Printer inclusive 1
paper role
1 connecting cable
(to connect printer and
breathalyzer ACE ALP-1 med)
1 power supply adapter
4 batteries (1.5 V / Alkaline)
1 PC cable to correct the
time settings in the printer (this printer has got an integrated time setting memory,
so the PC Cable is only used for the time setting in connection with the ACE AL9010
breathalyzer which can also be used together with this optional printer)
Introduction:
Thank you for purchasing our ACE ALP-1 Printer for usage with the ACE ALP-1 med
Breathalyzer! We want to inform you that the printer must only be used on basis of
the instructions mentioned in this manual.
Label of individual components:
Button to open the cap
for a paper change
Power Button
IrDA Window
Connection for
adapter (7,5 DC 2,0 A)
Serial connection
(RS-232C) for the
delivered cables
USB Connection (optional,
no USB cable available)
FEED Button
LED light:
Green (printer is ready)
Yellow (only with optional
Bluetooth function)