Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electro-Watertester (pH-Level/Chlorine) „PC-101"
Preface
Dear Customer,
we like to congratulate you on the
purchase of your new electro-watertester!
You have choosen a product which
combines deliberate technical features
with an appealing design.
Please read this manual conscientiously
and carry out the given instructions before
and while you are using your new device.
Please note that you need to perform a
calibration before the first chlorine measurement.
Capability Characteristics
The device allows to measure the chlorine-level
And the pH-level of water in an easy way.
It is ideal for checking the water of your swimmingpool
so that you can decide if it is necessary to add
Chlorine, acid or soda.
Security Advices
Before using the device, please check it for any possible damages. In case of damage do not operate it.
•
Dropping on hard floor may cause a damage on the device.
•
Immerse the probe only in water never in another liquid.
•
When not using the device turn the rotary switch to the right „PH", which means also it is off.
•
Store the device in a cold and dry place and protect it from solar radiation.
•
Caution! Should the device itself get damaged, please let the repair to the manufacturer or to a qualified
•
service agent.
Please dispose packaging materials properly and do not let play children with it.
•
The device itself is no toy either. Do not let children play with it too.
•
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung Stand 12/2016
Reference Manual
ETT Distribution GmbH Schmalbachstraße 16 38112 Braunschweig
Technical Specifications:
Operation: 1.5 V battery size „AA".
1515021
Werbung
