Using The Alarm Function; Show Values On Display - ADE AM 1600 FitVigo Bedienungsanleitung

Show values on display

Using the alarm function

Via the FITvigo app you can use the activity tracker as an alarm.
1. Start the app on your smartphone.
2. Set the desired alarm time.
3. Save the set alarm time.
4. Follow the instructions that are displayed in the app.
5. Confirm the notification that the alarm time has been successfully saved.
At the set time the activity tracker begins to vibrate in intervals; furthermore, a blinking
alarm symbol is shown on the display.
− Press the operating button of the activity tracker in order to switch off the alarm
function.
Show values on display
Press the button on the activity monitor when the display is switched off.
If sufficient current is available, the display shows your current values.
5.2
5.2
5.2
0.36
In this instance, you should soon charge the battery – see "Charge battery".
By repeatedly pressing the button on the activity monitor, the following data will also
541
0.36
be shown in turn:
0.36
17:00
541
541
17:00
17:00
5.2
5.2
0.36
0.36
If the button is not pressed again, the display turns off after 3 seconds. 541
‚ The values relating to sleep monitoring can be accessed exclusively
541
17:00
via the app.
‚ The units of measurement for the values obtained by the activity
17:00
tracker can likewise be set only via the app.
18
If there is insufficient power, the battery charge status is displayed
first when you press the button.
Number of steps
Time
Calorie consumption (estimated)
Distance covered
Activity Tracker AM 1600/1601/1602