Siemens 5WG1 372-5EY01 Bedienungsanleitung Seite 42

6.2 Manual ON / OFF (override switching)
Each channel can be switched ON manually in the automatic program. In which
case, the symbol H = hand appears in the display.
An override switching is cancelled again by the next switching command. The H
display is turned off.
Select Channel: e.g. Button 1 = Channel C1, Button 2 = Channel C2 etc.
Select Status: Button 1 = Switch ON, Button 0 = Switch OFF
Example: Switch ON Channel C2 manually, press button 2, once (press 1).
Auto
2
C1 C1
C2 C2
C3 C3
C4 C4
1 1 2 2 3 3 4 4 5 5 6 6 7 7
Each channel can be switched OFF manually in the automatic program. An over-
ride switching in the automatic program is corrected again by the next switching
command. (The H symbol is turned off).
Select Channel: e.g. Button 1 = Channel C1, Button 2 = Channel C2 etc.
Select Status: Button 1 = Switch ON, Button 0 = Switch OFF
Example: Switch OFF Channel C2 manually, Button 2, press.
Auto
2
C1 C1
C2 C2
C3 C3
C4 C4
1 1 2 2 3 3 4 4 5 5 6 6 7 7
6.3 Random Program
General Comment
A random program causes the time switch to switch ON or OFF at random bet-
ween one or more pairs of switchings (ON and OFF switching time).
Duration of the random ON and OFF switching time approx.
10 – 120 minutes.
The random program can be selected individually for each time channel.
Example:
Between 19.00 and 22.00 random ON (display:r)
Auto
Between 0.00 and 06.00 random ON (display:r)
1
C1 C1
C2 C2
C3 C3
C4 C4
1 1 2 2 3 3 4 4 5 5 6 6 7 7
Random
Program
Auto
0
C1 C1
C2 C2
C3 C3
C4 C4
1 1 2 2 3 3 4 4 5 5 6 6 7 7
42
Programmed switching pairs
Random
Program