Sprue Wi-Safe 2 Anleitung Seite 3

Setup steps
1. Identify appropriate installation positions for the unit (detailed in the product manual).
2. Activate all units and test individually prior to creating a network.
3. "Learn in" the first 2 units to start the network.
4. Once learnt in, please allow one minute before learning in the next unit.
5. Use the last learnt in unit (from step 3) to learn in a new unit, using a daisy chain method
(as illustrated on the next page) and repeat the process until the required network is
complete.
6. Install the units in their selected locations.
7. Once complete, it is recommended to test the network by pressing the test button on the
last unit to be learnt in. Make sure all units respond.
3