DETEWE M100-ADSL Bedienungsanleitung Seite 8

menu to load the current version of the
online help.
2. Open the PBX Configuration:
Ports: Slots menu. The card type
DSL modem appears in the in-
serted column of the table for Slot
0/3.
3. In order to begin operating the DSL
modem, you must first configure it.
To do this, you click on the entry
Slot 0/3 in the table.
The PBX Configuration - Ports -
Slot - Change dialogue opens.
4. You then select the card type DSL
modem from the Configured list,
and confirm your selection by
clicking on Apply.
5. In order to establish connections to
the Internet via the DSL modem
you must configure a suitable ISP
connection. To do this, open the
NET Configuration: Connections:
ISP menu. Click on the New button
on the ISP - Provider status page.
The ISP - Provider - New dialogue
opens.
6. Select one of the following types of
connection: T-Online T-DSL (PP-
PoE), T-Business T-DSL (PPPoE) or
DSL (PPPoE). Complete the data in
the input fields that now open (for
details, please see the online help).
To confirm your input, click on Ap-
ply.
M100-ADSL Interface DSL Modem
8
Note: If another xDSL modem is al-
ready being operated via PPPoE in the
same LAN, conflicts can arise when con-
nections to the Internet are established
(there is a risk of confusion). Remove the
other DSL modem from the LAN, and de-
activate the corresponding modem driv-
ers on all PCs that used to access this
modem.
Status Query
The current status of the DSL modem is
displayed in the ISP Web application
on the Web console.
Updating the Modem Firmware
Whenever a newer version of the mo-
dem firmware becomes available, you
can use the SYS Configuration: Com-
ponents to load it.
Version Query
The current versions of the
OpenCom 130 and the DSL modem
firmware are displayed in the System
info: Versions menu.
DeTeWe AG & Co.
Zeughofstraße 1, D-10997 Berlin
WWW: http://www.detewe.de/
Item No.: 4513730 As of September 2003
Subject to changes
Installation Guide