Troubleshooting - Azusa URZ3396 Bedienungsanleitung

TROUBLESHOOTING

Please follow the instructions stated below if you meet the following problems. If problem
remains after you check it, please turn to our local distributor for help or contact our
company.
Problem
No sound
Sound distortion
SPECYFICATION
■ Frequency response: 20~20kHz +/- 1.5dB
■ Power output (RMS): 60 W
■ Impedance: 4 Ω
■ THD: <=0.2%
■ S/N (Main channel): 86 dB
■ Bass control: +/- 10dB (100Hz)
■ Treble control: +/- 10dB (100Hz)
■ Power input: AC 220V / 50-60 Hz
■ Dimensions: 140x310x630mm (2pcs)
Specifications are subject to change without notice.
EN
Made in China for LECHPOL Zbigniew Leszek, Miętne, 1 Garwolińska Street, 08-400 Garwolin.
12
Owner's manual
Causes
1.Incorrect speaker connection
2.Wrong input mode
3.Volume at lowest level
1.Master volume too loud
2.The speaker is broken
Solutions
1.Check speaker connection
2.Choose the right input mode
3.Turn the master volume knob
1.Turn the master volume
2.Repair or change speaker