Exo Terra Monsoon SOLO Bedienungsanleitung Seite 11

E
15. Close the lid and connect the power supply jack to the back of
the unit.
16. Make sure the unit is in its final operating location, on a solid,
level surface.
17. Plug the power adaptor into the wall socket, your Exo Terra
Monsoon SOLO High-pressure Misting system is now ready to use.
In order to remove the tubing from the unit, press and hold the blue
ring down, while pulling out the tubing. Please note that nozzles
can be mounted in multiple terrariums.
®