Inhaltsverzeichnis
Werbung
10 Beschreibung der Systemdateien
10.1 Aufbau *.PLST Dateien
Hinweis: Die PLST-Datei verwendet derzeit nur englische Strings.
Die Playlist-Datei kann aus der Datei-Liste manuell ausgewählt oder mittels Autostart von USB oder
microSD Karte abgespielt werden, wenn Dateiname = autorun.plst
Parameters are separated with "," symbol
Parameters are not case sensitive
# - lines beginning with "#" and ";" are just comments
New line must begin with "SI:"or "HEADER," (HEADER, just once within each plst, it is valid for all SI: lines. If not defined in HEADER, then
value inherits from device current settings)
D :
delay to the next photo (number in seconds), duration
HB :
Type of horizontal banner NONE, TEXT, IMAGE, CLOCK, INFO
VB :
Type of vertical banner NONE, TEXT, IMAGE, CLOCK, INFO
ORDER :
Ordering of the items RANDOM, NAME, TIME, PATH
COPY :
false/true if the files should be copied first
COPYLOC: Location to copy to
TRANS :
Used transition to show the photo DISSOLVE, FADE_IN_OUT, ZOOM_IN, ZOOM_OUT, SLIDE_LEFT, SLIDE_RIGHT, RANDOM,
NO_TRANSITION, #KEN_BURNS_ZOOM_OUT, GRAY_SCALE, PAGE_TURN, BLINDS
LAYOUT: Used layout FULLSCREEN, FOUR_REGIONS, FOUR_REGIONS_CENTERED, RANDOM, CORNERS, SINGLE_FLY, DOUBLE_FLY,
RANDOM_FLY, #FLY_DOWN, FLY_UP, MAX
R :
Find photo also in subfolders (only for DIR)
TEXT :
Speed of the text VERY_SLOW, SLOW, NORMAL, FAST, VERY_FAST
AR :
Aspect ratio of the image DEFAULT,STRETCH,ZOOM
NUMBER: Numbering TRUE, FALSE
TXIM_NAME : Name of the identifier used to retrieve image or text file to be used in a banner. (No extension needed, only file name)
TXIM_LOCATION : Location where the image or text file for the banner can be found.
SILENT:
Surpress visible information during Slideshow, progress rotational circle, loading during slideshow ON, OFF
SIPREF:
SI preferred item , that runs at defined time not in the sequential order
TIM:
minute-based parameter within 1-hour cycle
SI:
Slideshow line with file to be displayed
HEADER, - special line defines global parameters for all plst items ( otherwise parameter is valid in given line only )
SD, USB1, USB2, Memory – local storage. Can be used as well relative path to PLST folder, e.g. SI: Subfolder/123.jpg
FTP remote location – ftp.i-frame.net/123.jpg or with credentials ftp://username:pasword@ftp.i-frame.net/123.jpg
WWW remote location – http://www.cnn.com or www.cnn.com
STREAM remote location (when rtcp stream requested) – Stream://www.stream.net
File locations can be following: Sdcard, Sda1 (USB1), Sda2 (USB2 ), www, ftp, smb
Example of plst file
HEADER,D:10, LAYOUT:FULLSCREEN, NUMBER:FALSE, SILENT:ON, HB:NONE, VB:NONE, TRANS:DISSOLVE, TXIM_NAME : IF-
show,TXIM_LOCATION: SD/iFrame
SI:ftp://70199:70199@ftp.i-frame.net/ds-13.jpg,,HB:info, VB:IMAGE
SI:http://www.i-frame.net
SI: FolderA/23.jpg
# identiical location as PLST file, one folder deeper)
SI: USB1/iFrame/ABC.jpg, , ar:zoom, VB:image
SIPREF:stream://212.79.96.134:8015, TIM:30, D:300
# This video stream will start repeatedly at reaching 30mins ( 12:30, 13:30 - according system time) and
# playback will last 5 minutes ( 300 sec )
*********************************************
PLST file is NOT case sensitive.
File locations can be following:
Sdcard, SD, Sda1=USB1, Sda2=USB2, Memory, www, ftp, smb....
24
Werbung
Inhaltsverzeichnis
