Canton musicbox S Bedienungsanleitung Seite 23

English
Problem Possible cause
Playback distorted. 1. the volume is too high.
2. the auX input is overdriven (only auX operati­
on). the maximum input level of the auX input
is 1.2Vrms.
nFC connection failure 1. the nFC function is deactivated on your mobile
device.
2. the nFC antenna of your mobile device is bey­
ond the range of the musicbox (max. 2­3 cm).
3. You have not moved the mobile device away
from the musicbox before confirming the
connection request.
Your mobile device does not 1. the Bluetooth
connect to the musicbox auto­ is deactivated.
matically.
2. the musicbox has been deleted from the Blue­
tooth ® menu of your mobile device.
3. the auX input has been selected on the
musicbox.
4. 5 or more other mobile devices have been con­
nected to the musicbox since the last use.
44
Solution
1. Reduce the volume.
2. Reduce the output level of your mobile device.
1. activate the nFC function on your mobile
device.
2. the nFC of your mobile device needs to be
central to the "centre pad" of the musicbox. the
antenna position of the mobile device is often
marked "nFC".
3. Before confirming the connection on your
mobile device, move this away from the music
box. Repeat the process.
® function on your mobile device 1. activate the Bluetooth
device.
3. Pair the musicbox again to your mobile device.
3. select the Bluetooth ®
4. Pair the musicbox again to your mobile device.
Note: this will mean that the mobile device not
connected for the longest time will be deleted
from the device list of the musicbox.
Problem
no sound or distorted sound via
Bluetooth ® wireless technology.
® function on your mobile the Bluetooth ® connection between
the mobile device and the musicbox
was unexpectedly interrupted.
input on the musicbox..
Possible cause Solution
1. there is no connection between the musicbox and 1. Connect the mobile device as described.
the mobile device.
2. Your mobile device is paired but not connected. 2. the mobile device has not connected automatically
and must be connected manually.
3. Your mobile device is connected. 3.1. Make sure that any sources of disturbance (e.g.
WiFi router) are not too close to the musicbox or
the mobile device.
3.2 it is often not possible to have interference­free
simultaneous operation via WiFi and Bluetooth
connection on a mobile end device. deactivate the
WiFi on your mobile device.
4. You are out of range of the musicbox (max. 10 m). 4. Reduce the distance between the musicbox and the
mobile device.
1. the musicbox switched off because there was no 1. to prevent the musicbox from switching off auto­
music played for 5 minutes (battery operation) or matically set the volume of your mobile device to
60 minutes (mains operation). minimum (mute).
2. You have placed your already connected nFC­ 2. if you bring an already connected nFC­enabled mo­
enabled mobile device back on the "centre pad". bile device close to the "centre pad" the Bluetooth
connection is terminated . to reconnect, bring the
mobile device close to the "centre pad" again.
3. You have selected the auX input on the musicbox. 3. select the Bluetooth
box to create the connection.
English
®
®
® input and wait for the music­
45