True Wireless - Canton musicbox S Bedienungsanleitung

English

True Wireless

the true Wireless function allows you to connect your musicbox wirel­
essly with another musicbox as a second audio source in the same room.
Here we differentiate between stereo mode, in which musicbox 1 plays
the sound signal of the left channel and musicbox 2 plays the sound
signal of the right channel (as with a traditional stereo system) and Party
mode, in which both musicboxes play the same stereo sound signal.
With the true Wireless function, the volume of both musicboxes is syn­
chronised. the same applies to switching the devices off, i.e. if you switch
off one musicbox, the other musicbox automatically switches off too. in
true Wireless mode it is recommended that the mobile device is always
connected to musicbox 1.
Stereo mode
activate stereo mode as follows:
switch on both musicboxes by pressing the power button
1
2 On musicbox 1 select the Bluetooth ® input
blue).
On musicbox 1 briefly press the Bluetooth ®
3
the same time. You will hear the voice message "true Wireless Pairing".
the left led of musicbox 1 in the centre pad flashes blue.
4
Within 5 seconds a signal tone can be heard on musicbox 1.
5
On musicbox 2 select the Bluetooth ® input
6
blue).
On musicbox 2 briefly press the Bluetooth
7 ®
at the same time. You will hear the voice message "true Wireless
Pairing".
38
True Wireless
musicbox 1
. the right led of musicbox 2 in the centre pad
8
(led flashing or steady flashes blue.
When the voice message "stereo Mode left"
9
and volume , button at comes from musicbox 1 and "stereo Mode
Right" comes from musicbox 2 and the flas­
hing leds in the centre pad of musicboxes 1
and 2 turn a steady blue then the connection
(led flashing or steady has been successful.
and volume , button
Party mode
to switch from stereo mode to Party mode, press the
musicbox 2 Bluetooth ® button on musicbox 1 as often as necessary for
approx.3 seconds until you hear the voice message "Party
Mode". now press the Bluetooth
often as necessary for approx. 3 seconds until you hear the
voice message "Party Mode". Both musicboxes are now in
Party mode.
switch both musicboxes directly into Party mode as follows:
switch on both musicboxes by pressing the power button
1
.
On musicbox 1 select the Bluetooth
2
(led flashing or steady blue).
On musicbox 1 briefly press the Bluetooth
3
me , button at the same time. You will hear the voice
message "true Wireless Pairing".
the left led of musicbox 1 in the centre pad flashes blue.
4
Within 5 seconds a signal tone can be heard on
5
musicbox 1.
On musicbox 2 select the Bluetooth
6
(led flashing or steady blue).
On musicbox 2 briefly press the Bluetooth
7
me , button at the same time. You will hear the voice
message "true Wireless Pairing".
the right led of musicbox 2 in the centre pad flashes
8
blue.
When the voice message "stereo Mode left" comes
9
from musicbox 1 and "stereo Mode Right" comes from
musicbox 2 and the flashing leds in the centre pad of
button on musicbox 2 as musicboxes 1 and 2 turn a steady blue then the connec­
®
tion has been successful.
10 Press the Bluetooth
necessary for approx. 3 seconds until you hear the voice
message "Party Mode".
Press the Bluetooth
11
necessary for approx. 3 seconds until you hear the voice
message "Party Mode".
® input
and volu­
®
Note: the last true Wireless status is saved in both
devices and can only be deleted by pressing the Blue­
tooth and Mute
®
words, when both devices are switched on they connect
with each other automatically if they are within range.
input
®
® and volu­ AUX-IN True Wireless
in true Wireless mode the auX input can also be used. For
this you have to select the auX input on the musicbox to
which the 3.5 mm jack is connected. the second musicbox
remains set on Bluetooth
English
® button on musicbox 1 as often as
button on musicbox 2 as often as
®
buttons simultaneously. in other
® input.
39