Control Panel; Diposal; Control Panel / Starting The Appliance - AEG SK 88843-6I Gebrauchsanleitung

Use and Control
Before Use
Wait 4 hours before connecting the appliance to allow the oil to flow
back in the compressor.
Before using the appliance for the first time, wash the interior and all
internal accessories with lukewarm water and some neutral soap so as to
remove the typical smell of a brand-new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the
finish.
Remove safety elements used for transportation.

Control panel

1 Light switch
2 Temperature regulator and
ON/OFF switch
Starting the appliance
The temperature regulator is located at the top of the appliance on the
control panel. It is also the ON/OFF switch.
A coin is required to turn the temperature regulator.
Insert the plug into the wall socket and turn the thermostat knob
clockwise beyond position< O > (OFF).
The interior lighting comes on. The compressor starts and then runs
automatically. To switch off the appliance, turn the temperature regulator
to position < O >.
27