AEG S 17 TK 58 Gebrauchsanweisung Seite 32

Put the door back in its place.
Relocate the door holder pin in
the door holder as per the figure.
Place the door holder pin in the
door at the bottom on the left
side, and fix the door holder with
the screw.
Drive in the two adjustable front
legs, and raise the appliance in the
upright position.
Relocate the door handle from the
left side to the right, and blind the
bore-holes with the plugs
delivered with the appliance.
To reverse the handle proceed as follows:
Remove screw covers (if fitted) and
handle retaining screws. Remove
blanking plugs on the opposite
side using a punch.
Relocate the handle to the
opposite side and refit retaining
screws (covers if fitted), and push
the plastic plugs supplied with
the appliance into the holes
where the handle was previously
fitted.
32