Technical Data - AEG Electrolux KM 700 Gebrauchsanweisung

822_949_249 KM700.book Seite 25 Dienstag, 22. Januar 2008 10:09 22
0 Insert blade unit in container from
below. Hold blade unit at a slight angle.
Tighten blade unit using the closing
cover as tool by turning clockwise
(fig 13).
All-purpose bowl and tools
0 The all-purpose bowl and tools should
be cleaned in rinsing water.
1 Caution: The metal blade is extremely
sharp! Danger of injury!
Plastic parts age more quickly if
1
cleaned frequently in a dishwasher. If
they are nevertheless to be cleaned in a
dishwasher, they must be placed in the
upper basket.
Inserts
0 Clean inserts with brush or cloth under
running water or in a dishwasher!
Caution: The inserts are very sharp!
1
Danger of injury!
Storage
All accessories can be stored directly in
the appliance.
• Store the inserts in the accessories
compartment (fig. 1/K).
Caution: The inserts are very sharp.
1
Danger of injury! They should only be
held by the handle!
• Stow the accessories away in the all-
purpose bowl as shown in fig. 12.
Caution: The metal blade (fig. 1/P) is
1
extremely sharp! Danger of injury!
Hold the metal blade only by the han-
dle and store only with the blade guard
fitted!
• Wind the cable round the two hooks at
the rear of the appliance (fig. 14).

Technical data

Mains voltage: 230 – 240 V
Power consumption: 700 W
This appliance conforms with the fol-
;
lowing EC Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 89/336/EEC with
amendments 92/31/EEC and
93/68/EEC
g
25