Safety Instructions And Hazard Warnings; Commissioning - VOLTCRAFT SPS 1525 PFC Bedienungsanleitung

Controls
(fold-out page)
(1) Power switch for taking the device into operation (ON / OFF)
(2) Power indicator, lights up in green
(3) Connecting jack "minus pole" (for 1560 PFC only up to a maximum of 5A)
(4) Connecting jack "plus pole" (for 1560 PFC only up to a maximum of 5A)
(5) Fixed voltage switch for 13.8V on the underside of the device (only for the 1525
PFC and 1540 PFC)
(6) Adjustment control fort he output voltage
(7) Overload indicator, lights up in red
(8) 3 digit LED display for output current
(9) 3 digit LED display for output voltage
(10) Fan opening for cooling the device
(11) Fuse holder for the mains fuse
(12) Shockproof cold device connector
(13) "SENSE" connection for automatic voltage correction on the high-current output
(16 and 17)
(14) Remote control input for voltage control ("VOLTAGE REMOTE")
(15) Function switch for remote control
(16) Screw terminal jack high-current output "minus pole" up to 60A
(17) Screw terminal jack high-current output "plus pole" up to 60A

Safety Instructions and Hazard Warnings

Damage due to non-compliance with these operating instructions
leads to expiry of the warranty. We do not accept liability for
damage to property or injury to persons caused by mishandling or
non-compliance with the safety instructions.
• This device left the factory in perfect condition in terms of safety engineering.
To maintain this status and ensure safe operation, the user must comply with the
safety instructions and warnings ("Caution!" and "Note!") laid down in the present
operating instructions. The following symbols must be observed:
19