Setting The Co; Threshold - Renson Cube Gebruikershandleiding

➌
• Shortly press ▲
9 • Setting the CO
The Threshold value for the CO
MENU – CO THRESHOLD (only accessible when a CO
2
TouchDisplay). The cook valve will react when this threshold value is reached.
EN
134
• By pressing
TouchDisplay as repeater (KNX Repeater: ON). Confirm
your choice by pressing
MENU – DEVICE SETTINGS.
AND ▼ in order to leave the INSTALLER MENU – DEVICE SETTINGS.

Threshold

2
controlled extraction can be set by accessing the INSTALLER
2
▲ or ▼ you can choose to configure the
n . You will return to the INSTALLER
sensor is integrated in the
2