Installation; Operation - Power Walker AVR 1500/SIV Schnellstartanleitung

4. Installation

I: Inspection
Remove the AVR from the shipping package and inspect the unit. Be sure that nothing inside the
package is damaged.
II: Placement
Please install the AVR in a protected environment.
 Do NOT block the top or side air vents on the unit. Please
reserve 20cm space to avoid interference.
 Do NOT operate the AVR where the temperature and humidity
is outside the specific limits. (Please check the specs for the
limitations.)
III: Connect to Utility and Charging
Plug in the AC input cord to the wall outlet.
IV: Connect Your Equipment
Plug equipment into the AVR rear-panel outlets. Then switch the unit on by press the front panel
power switch to "RESET" position.
Th o al po
i s ap i ( f

5. Operation

I: Setting Startup Delay Time Switch
Delay : Setting delay time as 3 minutes. It's designed to avoid damage devices with AC
motor from consecutive starts. It's perfect to use with devices such as refrigerators, freezers,
air conditioners or dehumidifiers.
Undelay : Setting delay time as 10 seconds. It's designed for use with voltage sensitive
equipment such as: personal computers, monitors, inkjet printers, scanners or faxes. It's also
designed for use with home appliances such as televisions, stereos, CD/DVD players, VCRs,
modems, and telephone equipment.
onsump ion of all quip
o sp ). aus
n plu d in o th
h b o faul (blo ).
3
V mus no x d
EN