Use Of The Appliance; Setting The Water Softener; Manual Adjustment - ZANKER ZKI1410 Benutzerinformation

Use of the appliance

Refer to the following instructions for each step of pro-
cedure:
1. Make a check if the water softener level is correct
for the water hardness in your area. If necessary
set the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the dishwasher.

Setting the water softener

The water softener removes minerals and salts from
the water supply. Minerals and salts can have bad ef-
fect on the operation of the appliance.
Water hardness is measured in equivalent scales:
• German degrees (dH°).
• French degrees (°TH).
°dH °TH
51 - 70 91 - 125
43 - 50 76 - 90
37 - 42 65 - 75
29 - 36 51 - 64
23 - 28 40 - 50
19 - 22 33 - 39
15 - 18 26 - 32
11 - 14 19 - 25
4 - 10 7 - 18
< 4 < 7
1) No use of salt required.
You must set the water softener manually and
electronically.

Manual adjustment

The appliance is set at the factory at position 2.
20
Water hardness
mmol/l
9,1 - 12,5
7,6 - 9,0
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
< 0,7
5. Set the correct washing programme for the type of
load and soil.
6. Fill the detergent dispenser with the correct quan-
tity of detergent.
7. Start the washing programme.
If you use detergent tablets, refer to the chapter
'Use of detergent'.
• mmol/l (millimol per litre - international unit for the
hardness of water).
• Clarke.
Adjust the water softener to the water hardness in your
area. If necessary, contact your local water authority.
Clarke manually
64 - 88 2
53 - 63 2
46 - 52 2
36 - 45 2
28 - 35 2
23 - 27 2
18 - 22 1
13 - 17 1
5 - 12 1
< 5 1)
1
Water hardness setting
electronically
10
9
8
7
6
5
4
3
2
1)
1