Info Display - Peaq PPB200BT-B Bedienungsanleitung

ENGLISH
MANUEL PROGRAM SETTING
1. You can assign your chosen channel to
the program memory between 1- 20.
2. Select a set channel and press M button.
Scroll through the menu with the
button until MEMORY appears. Confirm
with button.
3. Assign with the
memory for the channel and confirm by
pressing
4. Press M button to exit the setting mode.
CHOOSE A STORED CHANNEL
1. Press the
the display.
2. Select a set channel with

INFO DISPLAY

1. Press the M button and scroll through the
menu with the
appears. Confirm by pressing
2. Select an info display with the
button and confirm by pressing
can choose from followings:
• Station Text
• Station Name
• Program Typ
• Rds Clock
3. Confirm by pressing
4. Press M button to exit the setting mode.
Note: You can mute/unmute the FM radio by
pressing the
38
IM_PPB200BT_150831_V04_HR.indb 38
/
/ button program
button.
button until FM appears on
/ .
/
button until INFO
button.
/
. You
button.
.
AUX-IN mode
A UX
This mode allows you to use the radio as a
speaker for an external device (e.g. mobile
phone or MP3 player).
Warning! Observe the relevant safety
information for use with other devices when
connecting an external device.
1. Connect the cinch plug (3.5 mm) of the
audio cable with the audio playback
device and the other cinch plug (3,5 mm)
into the AUX-IN jack of the speaker.
2. Press the button until AUX appears
on the display. The product is in AUX-IN
mode.
3. Turn on the audio playback device and
start the music playback.
4. You can adjust the volume with the -/+
button.
Note: You can mute/unmute the AUX-IN
playback by pressing the .
31/8/15 1:45 PM