Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The ATEX certificate and product label carry the ATEX group and category marking:
II 2 G
Where:
Signifies compliance with ATEX
II
Signifies suitability for use in surface industries
2
Signifies suitability for use in a zone 1 area
G
Signifies suitability for use in the presence of gases
The ATEX certificate and product label also carry the following mark:
This signifies unit compliance to the relevant European directives, in this case 94/9/EC, along with the number
of the notified body issuing the EC type examination certificate.
These units also have the following approvals:
Main Harmonics (AC) to EN61000-6-3:2007 / IEC61000-3-2:2006
Conducted Emissions (DC and AC) to EN61000-6-3:2007
Radiated Field Immunity (DC and AC) to EN61000-6-2:2005 / IEC61000-4-3:2002 + A1:2002
Electrical Fast Transients/Bursts (DC and AC) to EN61000-6-2:2005 / IEC61000-4-4:2004
Surge Immunity (DC and AC) to EN61000-6-2:2005 / IEC61000-4-5:1995 + A1:2000
Conducted Immunity (10V) to EN61000-6-2:2005 / IEC61000-4-6:2005 + A1:2004 + A2:2006
Dips and Interruptions (AC) to EN61000-6-2:2005 / IEC61000-4-11:2004
Electrostatic discharge (DC and AC) to EN61000-6-2:2005 / IEC61000-4-2:1995 + A1:1998 + A2:2000
Radiated emissions (DC and AC) to EN61000-6-3:2007 / CISPR 16-2-3:2006
Ingress protection (IP66 & 67) to BS EN 60598-1:1997
© Cooper MEDC 2010
02/11
Werbung
