Installing And Power Supply - D-MAX 3320011 Bedienungsanleitung

8 Installing and power supply

OBD Interface
Illustration 3:
1.
2.
3.
34 / 44
Connect the Power/data cable to the OBD interface of
your vehicle. The position of the OBD interface varies
depending on the vehicle model, but mostly in the area
below the steering wheel. Please check the instructions
of your vehicle in advance to determine the exact posi-
tion.
Route the Power/data cable so that the driver's visibility
is not affected.
Connect the camera to the Power/data cable (via 8-pin
connector).