20. ETHERNET LINK CONFIGURATION
⇒ Connect CP 540 to PC via red Ethernet cable HL540-2.
⇒ Configure the Ethernet configuration on your CP 540 (menu:
⇒ Validate the IP address, or change it if necessary (we recommend that you keep the default value at
192.168.001.050).
Note: if you are connecting several CP 540's together via Ethernet, it is imperative to set unique IP
addresses for each unit.
Example:
If your PC is already connected to a network server (LAN), its IP address is defined automatically. You
should then disconnect from the LAN and configure a special IP address for this application.
20.1. Configuration of your PC IP address
•
Select the program
connection
(Start
We suggest that you create a short cut
from your desk top to simplify the
access to the LAN.
•
Select
•
Select
•
Choose
•
Again, select
TAG Heuer Timing
CP 540 # 1
IP: 192.168.001.50
CP 540 # 2
IP: 192.168.001.51
Etc...
Network
Setting
Control
Local Area Connexion
Properties
Internet Protocol TCP/IP
Properties
Parameters
Panel)
Ethernet
ON)
Seite 42 / 48