Online User Interface On Minkpolice.com - MinkPolice MP2 Gebrauchsanweisung

MinkPolice User Manual

Online user interface on minkpolice.com

4.1 Trap Overview
When logging into your user profile on www.minkpolice.com you
will see an overview of all registered modules. The module
constantly monitors the trap door, and you will receive a message as
soon as the trap door shuts. The module can also be configured to
report an "I'm alive" status one or two times per day.
4.2 History
By clicking on a trap in the Trap Overview you can get a historical
overview of all reports a module has ever sent. Next to each report
you can see the battery level and signal strength of the module at
the given time.
In cases where the trap has been released you can register the catch
by clicking on Register catch next to the report. The catch is stored
in our database and can be drawn out for statistics if you have given
permission to this.
Register catches from other traps on your profile
On your profile you can register traps which do not have a
MinkPolice module on them, you can register what you have caught
in these traps, and you can place them on the Trap Map. To register
such a trap, click on the button Register New Device. During
registration, select the option Trap without MinkPolice module.
4.3 Settings
Click the menu button Settings. A number of tabs now show up.
Below is a short introduction to each tab.
Remember to click Save Settings after making changes.
Message settings
Here you can either add or delete email addresses and telephone
numbers that are to receive reports about the status of the modules.
You can also choose one of the following models for reporting:
v3.0 EN - 5