Storing Images In Sd Card - JVC AV-P960E Bedienungsanleitung

Storing Images in SD Card

Images taken can be stored in the SD card (sold separately).
DELETE
IMAGE SELECT
PAGE
SD CARD SYSTEM
Deleting images
Notes
● If an image is deleted in the thumbnail screen,
the next image will shift up and be displayed
in its position.
● The cursor will move to the next image fol-
lowing the deleted image.
Notes
● When removing or inserting the SD card or when powering off, make sure to press the [CAMERA] button and
confirm that the output image is a camera image. Otherwise, the data in the card may be corrupted or this unit may
not function properly.
● The SD card is made from parts that are susceptible to static charges. Malfunction might occur and the contents of
the card might be damaged due to static charges. As such, make sure to handle with extra care.
● Do not leave the SD card in the card slot. Remove the SD card for safe keeping after use.
● Number of images that can be stored:
32 MB: about 60 images, 64 MB: about 120 images
● 32 MB or 64 MB SD card from Panasonic is recommended.
E-20
1.
2.
SAVE
3.
ENTER
1.
Press the [CAMERA] button
2.
Insert the SD card
● To remove the SD card, push in the card before removing it from
the card slot.
3.
Press the [SAVE] button for more than
2 seconds
● The save indicator lamp lights up ➞ Blinks while saving is in
progress. Blinks ➞ Lights up ➞ Light goes off once saving is
completed. (about 2 seconds)
● Saving is not possible if the SD card switch has been turned on
to write-protect. In this case, the save indicator lamp will not blink.
● If the SD card is full and additional images cannot be stored, the
save indicator lamp will not blink. In this case, delete unwanted
images or use a new card.
1.
Select the image to delete
● <Normal screen>
To delete image, use the [PAGE
image to be deleted.
● <Thumbnail screen>
When the thumbnail screen is being displayed, use the [PAGE
, ] buttons to move the cursor to select the image to be
deleted.
2.
Press the [DELETE] button for more
than 2 seconds
● The delete indicator lamp lights up ➞ Blinks while deleting is in
progress. Blinks ➞ Lights up ➞ Light goes off once deleting pro-
cess is completed. (about 2 seconds)
, ] buttons to select the